Because the shower is one of the most frequently used fixtures in the bathroom, you want to install something that will withstand daily use — and look good in the process. Although the look of the space is important, be sure to make plumbing and heating system considerations as well. Whether you want a walk-in, shower/tub combo, zero threshold or double shower, here are a few things to consider as you start the shopping process.
What type of shower unit will work with your heating system?
Your heating system plays a large role in the type that will work in your home. First, understand what type of heating system you have. Once you have that information, one of the following should be right for you:
Electric: These can be used within any domestic water system. They are generally connected to the main cold water supply, and the water is then passed through a heating element. Be sure your fuse board is capable of providing the current necessary to power the shower.
Mixer: Suitable for either low or high pressure systems, these showers mix existing hot and cold water in a special valve before it is available at the shower head. In order to work properly, both the hot and cold water need to come from a source operating at the same pressure, such as a mains fed system or tank fed water. Because this type is connected to the same pipes used to supply water to other points, its flow rate may be affected if someone is concurrently running tap water or flushing the toilet.
Thermostatic mixer: These showers rectify dramatic changes in temperature through pre-set thermostats. Many have a temperature limiting device to prevent burning. However, this is the most expensive of the mixer options.
Power: Only able to be installed on low pressure, tank fed systems, this type of mixer increases the rate of flow from the shower head through integral pumps. A dedicated hot and cold supply is necessary.
Should you choose prefabricated or consider custom?
Available in a wide range of colors and styles, prefabricated showers are generally made from fiberglass or fiberglass-reinforced acrylic and will likely be more affordable. Some require assembly while others are a single-piece unit. Custom stalls let you have complete control over all fixtures and its finish, which may be more appropriate for your bathroom if your budget allows it. That way, you can get the walk-in, zero threshold or double shower you’ve always been dreaming of.
What type of prefabricated kits are available?
There are several ready-made styles on the market to fit your needs. Consider the following:
Corner: Shaped like a square, these are a great fit for smaller bathrooms or in master bathrooms where a separate stall from the bathtub is needed.
Neo-angle: These showers are roomier and have a distinctive five-sided diamond shaped base.
Round: These also fit in the corner, but have a rounded, finished edge.
Framed: Framed stalls rely on traditional exposed framework and trim to create a strong enclosure. Water is collected and trapped in a track, which requires occasional cleaning.
Frameless: Frameless designs require no frame and are generally paneled in glass, allowing light in. Without a track to collect water, they’re easier to maintain.
What kind of showerhead and fixtures should you buy?
In order to create a cohesive look, buying a multiple-piece faucet kit is the way to go; after all, it ensures that the finish and overall design is consistent. Most kits come with a showerhead, tub/shower handle and tub spout, though you can also upgrade with additional heads or an all-in-one panel.
I’m a full-strength Realtor in Southern Nevada. I look forward to working with you. I can be reached at (702) 358-7075 and RonaldSellsVegas@gmail.com. To learn more about me, go to Linkedin.com and enter Ron Feir in the search bar. Additionally, you can follow me on Twitter@ronfeir and Ronald Feir on Facebook. Also, I blog on WordPress.com and Tumbler.com. Finally, explore with me on Pinterest at Ron Feir.